更新内容如下: www.upan.cc
Version List :
Firmware V1.03
MP Tool V2.10.01.15
Flash DB V4.02.16
User Manual V103_00
Modify as below :
FW :
[1]. Improve Power Cycling. Speed up USB attached time.
[2]. Improve DDR training.
[3]. WHCK certification passed.
[4]. Added Cache Command Set firmware.
[5]. Fixed User Command Mode issue.
MP Tool :
[1]. Config Option :
1. Add ENFP Option.
2. Add SN Log to output.
3. Add Enable Unique Serial Number Function.
4. Hot Key : F8, Change Function To ResetHub.
5. Add Hex Base In The SN.
6. Add LED blink in the LED dialog.
[2]. Other Improve :
1. Fix Force Capacity Issue.
2. Modify Partition Function.
3. Fix Partition Function And UI Issue.
4. Modify Support DDR Option UI.
5. Fix Main UI Issue.
6. Fix Serial Number Function Issue.
7. Force Capacity and Partition Function Can Set At The Same Time.
8. Modify Scan Device Issue For Customer.
9. Prevent SDR Flash to load DDR firmware.
10. Modify Format Function.
11. Output current space of the StorageDeviceID.
12. A maximum of 31 with length of serial number.
13. Modify Get String Function.
14. Fix the Issue that run MP fail after reading information.
15. Enhance MP speed on XP.
16. Modify check device function.
Flash DB : (Flash support refer to Support List)
[1]. Change Micron PN of MT29F1TG08CUCAB.
[2]. Add Samsung 21nm MLC K9LCG08U0B information.
[3]. Add Micron L83A MT29F32G08CBADA, MT29F32G08CBADB,
MT29F64G08CFADA, MT29F64G08CFADB,MT29F64G08CECDB,
MT29F128G08CMCDB, MT29F256G08CUCDB information.
[4]. Add Micron L84C MT29F64G08CBCDB, MT29F128G08CECDB,
MT29F256G08CKCDB, MT29F256G08CMCDB,
MT29F512G08CUCDB information.
[5]. Add Toshiba 24nm SLC TH58TEG6H2HBA4C,
TH58TEG6H2HBAMC, TH58TEG7H2HBA8C, TH58TEG7H2HBASC,
TH58TEG8H2HBA89, TH58TEG8H2HBAS9 information.
[6]. Add Toshiba 19nm MLC TH58TEG7CDJBA4C, TH58TEG8CDJBA8C,
TH58TEG9CDJBA89 information.
Firmware V1.03
MP Tool V2.10.01.15
Flash DB V4.02.16
User Manual V103_00
Modify as below :
FW :
[1]. Improve Power Cycling. Speed up USB attached time.
[2]. Improve DDR training.
[3]. WHCK certification passed.
[4]. Added Cache Command Set firmware.
[5]. Fixed User Command Mode issue.
MP Tool :
[1]. Config Option :
1. Add ENFP Option.
2. Add SN Log to output.
3. Add Enable Unique Serial Number Function.
4. Hot Key : F8, Change Function To ResetHub.
5. Add Hex Base In The SN.
6. Add LED blink in the LED dialog.
[2]. Other Improve :
1. Fix Force Capacity Issue.
2. Modify Partition Function.
3. Fix Partition Function And UI Issue.
4. Modify Support DDR Option UI.
5. Fix Main UI Issue.
6. Fix Serial Number Function Issue.
7. Force Capacity and Partition Function Can Set At The Same Time.
8. Modify Scan Device Issue For Customer.
9. Prevent SDR Flash to load DDR firmware.
10. Modify Format Function.
11. Output current space of the StorageDeviceID.
12. A maximum of 31 with length of serial number.
13. Modify Get String Function.
14. Fix the Issue that run MP fail after reading information.
15. Enhance MP speed on XP.
16. Modify check device function.
Flash DB : (Flash support refer to Support List)
[1]. Change Micron PN of MT29F1TG08CUCAB.
[2]. Add Samsung 21nm MLC K9LCG08U0B information.
[3]. Add Micron L83A MT29F32G08CBADA, MT29F32G08CBADB,
MT29F64G08CFADA, MT29F64G08CFADB,MT29F64G08CECDB,
MT29F128G08CMCDB, MT29F256G08CUCDB information.
[4]. Add Micron L84C MT29F64G08CBCDB, MT29F128G08CECDB,
MT29F256G08CKCDB, MT29F256G08CMCDB,
MT29F512G08CUCDB information.
[5]. Add Toshiba 24nm SLC TH58TEG6H2HBA4C,
TH58TEG6H2HBAMC, TH58TEG7H2HBA8C, TH58TEG7H2HBASC,
TH58TEG8H2HBA89, TH58TEG8H2HBAS9 information.
[6]. Add Toshiba 19nm MLC TH58TEG7CDJBA4C, TH58TEG8CDJBA8C,
TH58TEG9CDJBA89 information.
银灿Innostor 903 MP Pack:http://www.upan.cc/tools/mass/Innostor/2012/youpan_2665.html