优盘之家

2-1. Test item: can select partial test items to do.
2-2. Flash info: disk media setting include flash maker, type, bank number…etc
2-3. Device setting: Input serial number, model name, f/w version, VID/PID…etc.
2-4. F/W setting: Show firmware setting.
2-5. RD: can get special information to analyze.
2-6. H/W setting:
2-1. Test item
Sata interface test.
Flash interface test.
Build defect table.
Pre-format.
Download program.
Check Tables
Read/write test


2-2. Flash setting
Flash maker.
Flash type.
Bank number.
Channel number.
Select specified firmware.
Set drive current
IDEMA capacity setting (see more detail in
http://idema.org/_SMARTsite/modules/local/data_file/show_file.php?cmd=download&da
ta_file_id=1066)
2-3. Device setting
Input serial number, model name, f/w version, VID/PID…etc. 优盘之家
2-4. FW setting
Later to early: add early bad blocks to early bad blocks when create defect table.
User guide for JMicron 60X MP tool
Version B.2.12 Oct 2009

Check flash module: check flash ID, max. channel number and max. bank number.
Erase rebuild early bad : Use the erase method to rebuild early bad blocks.
Repair used module : Preformat the module with new flash and used flash.
Recover code block : Erase the code block first.
2-5. RD
Get defect table from flash.
Put defect table to flash.
Rebuild bad block mark U盘之家

JMF603 SSD固态硬盘量产工具JMMa：http://www.upan.cc/tools/mass/JMicron/2012/JMF603_SSD_JMMassProd_vb.2.12.html